DIN 1025-5

Standard I-Beam (IPE) weight table

Standard I-Beam (IPE) is made to DIN 1025-5 in sizes 80 to 600. It is the most used building I-Beam for floor beams and frames, and in the market is known by its height in centimetres (e.g. I-Beam 14).

Standard I-Beam (IPE) weight table for all sizes

SectionHeight × flange width (mm)Web / flange thickness (mm)Weight per metre (kg)Weight of a 12 m bar (kg)Bar per tonne
IPE 8080 × 463.8 / 5.26.072.013.9
IPE 100100 × 554.1 / 5.78.197.210.3
IPE 120120 × 644.4 / 6.310.4124.48
IPE 140140 × 734.7 / 6.912.9154.76.5
IPE 160160 × 825 / 7.415.8189.35.3
IPE 180180 × 915.3 / 818.8225.64.4
IPE 200200 × 1005.6 / 8.522.4268.33.7
IPE 220220 × 1105.9 / 9.226.2314.43.2
IPE 240240 × 1206.2 / 9.830.7368.52.7
IPE 270270 × 1356.6 / 10.236.1432.82.3
IPE 300300 × 1507.1 / 10.742.2506.92
IPE 330330 × 1607.5 / 11.549.1589.81.7
IPE 360360 × 1708 / 12.757.1685.11.5
IPE 400400 × 1808.6 / 13.566.3795.61.3
IPE 450450 × 1909.4 / 14.677.6930.91.1
IPE 500500 × 20010.2 / 1690.71,0880.9
IPE 550550 × 21011.1 / 17.2105.51,2660.8
IPE 600600 × 22012 / 19122.41,4690.7

Weights are theoretical, based on nominal dimensions; actual weight may differ by a few percent depending on rolling tolerance and the mill, and the invoice is based on the weighbridge weight.

Standard I-Beam (IPE) weight calculation formula

Weight per metre is calculated from the cross-section area: weight (kg/m) = cross-section area (cm²) × 0.785. The area comes from the nominal dimensions (height, flange width, web and flange thickness and root radius).

For moment of inertia, section modulus and radius of gyration of each size, click the section name in the table or see the section property table.

To buy, see the today's Standard I-Beam (IPE) price list; prices are per kilogram and the final load weight is set by the weighbridge.

Standard I-Beam (IPE) weight table FAQ

How much does IPE 80 weigh?
One metre of IPE 80 weighs about 6.00 kg; so each 12 m bar weighs about 72.0 kg.
How is Standard I-Beam (IPE) weight calculated?
Weight per metre is calculated from the cross-section area: weight (kg/m) = cross-section area (cm²) × 0.785. The area comes from the nominal dimensions (height, flange width, web and flange thickness and root radius).
Why does the actual Standard I-Beam (IPE) weight differ from the table?
The table gives the theoretical weight from nominal dimensions. The production standard allows tolerances (tolerance) for dimensions and weight, so each mill's actual weight may be a few percent lower or higher. The final invoice is based on the weighbridge weight.
How long is each Standard I-Beam (IPE) bar?
The common Standard I-Beam (IPE) bar length in the market is 12 m; you can ask for other lengths or cut-to-size in your request.