EN 10051 / EN 10029
Steel Plate weight table
Hot-Rolled Sheet, oiled, Galvanized, pre-painted, chequered and ST52 sheets are all weighed with one formula, and the weight per m² depends only on thickness (zinc or paint coating adds a few tens of grams per m²). Common sheet sizes are 1×2, 1.25×2.5 and 1.5×6 m.
Steel Plate weight table for all sizes
| Thickness (mm) | Weight per m² (kg) | Steel Plate 1×2 m (kg) | Steel Plate 1.25×2.5 m (kg) | Steel Plate 1.5×6 m (kg) |
|---|---|---|---|---|
| 0.4 | 3.14 | 6.3 | 9.8 | 28.3 |
| 0.5 | 3.93 | 7.9 | 12.3 | 35.3 |
| 0.6 | 4.71 | 9.4 | 14.7 | 42.4 |
| 0.7 | 5.50 | 11.0 | 17.2 | 49.5 |
| 0.8 | 6.28 | 12.6 | 19.6 | 56.5 |
| 1 | 7.85 | 15.7 | 24.5 | 70.7 |
| 1.25 | 9.81 | 19.6 | 30.7 | 88.3 |
| 1.5 | 11.78 | 23.6 | 36.8 | 106.0 |
| 2 | 15.70 | 31.4 | 49.1 | 141.3 |
| 2.5 | 19.63 | 39.3 | 61.3 | 176.6 |
| 3 | 23.55 | 47.1 | 73.6 | 212.0 |
| 4 | 31.40 | 62.8 | 98.1 | 282.6 |
| 5 | 39.25 | 78.5 | 122.7 | 353.3 |
| 6 | 47.10 | 94.2 | 147.2 | 423.9 |
| 8 | 62.80 | 125.6 | 196.3 | 565.2 |
| 10 | 78.50 | 157.0 | 245.3 | 706.5 |
| 12 | 94.20 | 188.4 | 294.4 | 847.8 |
| 15 | 117.75 | 235.5 | 368.0 | 1,060 |
| 20 | 157.00 | 314.0 | 490.6 | 1,413 |
| 25 | 196.25 | 392.5 | 613.3 | 1,766 |
| 30 | 235.50 | 471.0 | 735.9 | 2,120 |
| 40 | 314.00 | 628.0 | 981.3 | 2,826 |
| 50 | 392.50 | 785.0 | 1,227 | 3,533 |
Weights are theoretical, based on nominal dimensions; actual weight may differ by a few percent depending on rolling tolerance and the mill, and the invoice is based on the weighbridge weight.
Steel Plate weight calculation formula
Weight (kg) = thickness (mm) × width (m) × length (m) × 7.85 — e.g. 3 mm Steel Plate 1.25×2.5: 3 × 1.25 × 2.5 × 7.85 = 73.6 kg.
To buy, see the today's Steel Plate price list; prices are per kilogram and the final load weight is set by the weighbridge.
Steel Plate weight table FAQ
How much does 10 mm Steel Plate weigh?
One m² of 10 mm Steel Plate weighs about 78.50 kg.
How is Steel Plate weight calculated?
Weight (kg) = thickness (mm) × width (m) × length (m) × 7.85 — e.g. 3 mm Steel Plate 1.25×2.5: 3 × 1.25 × 2.5 × 7.85 = 73.6 kg.
Why does the actual Steel Plate weight differ from the table?
The table gives the theoretical weight from nominal dimensions. The production standard allows tolerances (tolerance) for dimensions and weight, so each mill's actual weight may be a few percent lower or higher. The final invoice is based on the weighbridge weight.

Half a Century of Presence