DIN 536

Crane Rail weight table

Flat-bottom type A Crane Rail to DIN 536 is used for the runways of overhead and gantry cranes. The type number (A45 to A150) is the rail head width in mm, and the right rail is chosen from the crane's wheel load.

Crane Rail weight table for all sizes

TypeHead width (mm)Height (mm)Base width (mm)Weight per metre (kg)Weight of a 12 m bar (kg)
A45455512522.1265
A55556515031.8382
A65657517543.1517
A75758520056.2674
A1001009520074.3892
A120120105220100.01,200
A150150150220150.31,804

Weights are theoretical, based on nominal dimensions; actual weight may differ by a few percent depending on rolling tolerance and the mill, and the invoice is based on the weighbridge weight.

Crane Rail weight calculation formula

The weight per metre of Crane Rail is the value published in DIN 536; weight per bar = weight per metre × bar length (usually 8 to 12 m).

To buy, see the today's Crane Rail price list; prices are per kilogram and the final load weight is set by the weighbridge.

Crane Rail weight table FAQ

How much does an A45 rail weigh?
One metre of A45 rail weighs about 22.10 kg; so each 12 m bar weighs about 265.2 kg.
How is Crane Rail weight calculated?
The weight per metre of Crane Rail is the value published in DIN 536; weight per bar = weight per metre × bar length (usually 8 to 12 m).
Why does the actual Crane Rail weight differ from the table?
The table gives the theoretical weight from nominal dimensions. The production standard allows tolerances (tolerance) for dimensions and weight, so each mill's actual weight may be a few percent lower or higher. The final invoice is based on the weighbridge weight.
How long is each Crane Rail bar?
The common Crane Rail bar length in the market is 12 m; you can ask for other lengths or cut-to-size in your request.