Steel Reference

Steel grade equivalents table

Close equivalents of common steel grades in European, German, American, Japanese and Russian standards — from ST37 and ST52 to CK45, MO40 and stainless 304 and 316.

GroupEurope (EN)Germany (old DIN)USA (ASTM / AISI)Japan (JIS)Russia (GOST)
StructuralS235JRSt37-2A283 Gr.C / A36SS400Ст3сп
A36 has a slightly higher yield stress (250 MPa).
StructuralS275JRSt44-2A529 Gr.42SS490Ст5сп
StructuralS355J2St52-3A572 Gr.50SM490A17Г1С / 09Г2С
The most widely used high-strength structural steel; Steel Plate ST52.
Steel Plate coldDC01St12A1008 CSSPCC08пс
Steel Plate coldDC04St14A1008 DDSSPCE08Ю
Deep-drawing quality.
GalvanizedDX51DSt02ZA653 CSSGCC—
Boiler Steel PlateP265GHHIIA516 Gr.60SPV23520К
Boiler Steel PlateP355GH19Mn6A516 Gr.70SPV35516ГС
PipeL245 (API 5L Gr.B)St37.0A106 Gr.B / A53 Gr.BSTPG37020
EngineeringC45ECk45AISI 1045S45CСталь 45
Known on the market as CK45.
Engineering42CrMo442CrMo4AISI 4140SCM44038ХМ
Known on the market as MO40.
Engineering34CrNiMo634CrNiMo6AISI 4340SNCM44738Х2Н2МА
Known on the market as VCN150.
Engineering20MnCr520MnCr5AISI 5120SMnC42018ХГ
Case-hardening steel.
Stainless steelX5CrNi18-10 (1.4301)—304SUS30408Х18Н10
Stainless steelX2CrNi18-9 (1.4307)—304LSUS304L03Х18Н11
Stainless steelX5CrNiMo17-12-2 (1.4401)—316SUS31608Х17Н13М2
Stainless steelX2CrNiMo17-12-2 (1.4404)—316LSUS316L03Х17Н14М2
Stainless steelX6CrNiTi18-10 (1.4541)—321SUS32108Х18Н10Т
Stainless steelX12CrMnNiN17-7-5 (1.4372)—201SUS20112Х17Г9АН4
Stainless steelX6Cr17 (1.4016)—430SUS43012Х17
Ferritic and magnetic.
RebarB500BBSt500SA615 Gr.60SD390A500C
The closest equivalent to Iranian A3/A4 Rebar in terms of use; the classes are not exactly the same.

Equivalents are “close”, not identical: chemical composition, mechanical properties and test conditions differ slightly between standards. Substituting one grade for another on a project must be approved by the designer or client.

Grades page

Why does one steel have several names?

Each country or standards body names steels with its own system. For example, the common structural steel called ST37 on the Iranian market is S235JR in the European standard, SS400 in Japan and close to A36 in the US. Old DIN names such as ST37, ST52 and CK45 are still common on the Iranian market, although those standards have been replaced by EN.

When the drawing specifies a different grade

If the project specification calls for a grade sold on the market under another name, compare the shipment's mill test certificate (MTC) with the required grade: yield stress, tensile strength, elongation and, if needed, impact test.