Steel Weight Tables
A complete table for each product: weight per metre and per bar (or per m² and per Steel Plate) in all sizes, with the calculation formula and today's price. For custom dimensions, use the weight calculator.
Light wide flange beam (HEA) weight table
Light wide flange beam (HEA) is made to DIN 1025-3 in sizes 100 to 600. It is used for columns and beams in light and medium structures, sheds and building frames.
HEA 100: 16.67 kg per metre 18 sizes · view table ← DIN 1025-2Heavy wide flange beam (HEB) weight table
Heavy wide flange beam (HEB) is made to DIN 1025-2 in sizes 100 to 600. It is the most widely used wide-flange series, for main columns, girders, bridges and heavily loaded industrial structures.
HEB 100: 20.44 kg per metre 18 sizes · view table ← DIN 1025-4Extra heavy wide flange beam (HEM) weight table
Extra heavy wide flange beam (HEM) is made to DIN 1025-4 in sizes 100 to 300. With very thick flanges and web, it is used for columns of tall buildings, platforms, heavy bridges and large concentrated loads.
HEM 100: 41.79 kg per metre 11 sizes · view table ← DIN 1025-5Standard I-Beam (IPE) weight table
Standard I-Beam (IPE) is made to DIN 1025-5 in sizes 80 to 600. It is the most used building I-Beam for floor beams and frames, and in the market is known by its height in centimetres (e.g. I-Beam 14).
IPE 80: 6.00 kg per metre 18 sizes · view table ← DIN 536Crane Rail weight table
Flat-bottom type A Crane Rail to DIN 536 is used for the runways of overhead and gantry cranes. The type number (A45 to A150) is the rail head width in mm, and the right rail is chosen from the crane's wheel load.
A45 rail: 22.10 kg per metre 7 sizes · view table ← EN 10029Wear-Resistant Plate weight table
Wear-Resistant Plate (such as Hardox 400 and 500) has almost the same density as ordinary steel, so its weight is calculated like Hot-Rolled Sheet of the same thickness. Common sizes are 2×6 and 2.5×6 m, and cutting to custom sizes is available.
10 mm Steel Plate: 78.50 kg per m² 14 sizes · view table ← ASTM A312 / A554Stainless Steel Pipe weight table
Industrial and decorative 304 and 316 Stainless Steel Pipe is usually supplied in 6 m bar. Weight depends on outside diameter and wall thickness; the density of austenitic stainless (7.93) is slightly higher than ordinary steel.
2 inch Pipe, 2 mm wall: 2.90 kg per metre 11 sizes · view table ← EN 10051 / EN 10029Steel Plate weight table
Hot-Rolled Sheet, oiled, Galvanized, pre-painted, chequered and ST52 sheets are all weighed with one formula, and the weight per m² depends only on thickness (zinc or paint coating adds a few tens of grams per m²). Common sheet sizes are 1×2, 1.25×2.5 and 1.5×6 m.
10 mm Steel Plate: 78.50 kg per m² 23 sizes · view table ← Approximate weightSteel Deck weight table
Steel Deck (metal deck) is formed Galvanized Sheet for composite floors. Because the Steel Plate is corrugated, about 25 to 30 percent more Steel Plate is used to cover one m² of floor; the exact weight depends on the Hollow Section (rib height and pitch).
7 sizes · view table ← Approximate weightSteel shutter slats weight table
Shutter slats are formed from Galvanized Sheet strip. The weight per m² of a shutter door depends on slat thickness and shape and is needed to choose the motor and springs; shaft, side guides and lock are added separately.
6 sizes · view table ← ASME B36.10Seamless Pipe weight table
Seamless Pipe (seamless) is specified by nominal size in inches and wall schedule. Schedule 40 (standard) and schedule 80 (extra strong) are the most used, and lengths are usually 6 m.
4 inch schedule 40 Pipe: 16.07 kg per metre 16 sizes · view table ← EN 10056Angle weight table
Equal-leg Angle is identified by flange width and thickness (for example, Angle 50×5) and in the Iranian market is usually a 6-metre bar. It is used in trusses, bracing, door and window frames and light structures.
Angle 50×5: 3.73 kg per metre 17 sizes · view table ← DIN 1026-1Channel weight table
UNP Channel with tapered flanges to DIN 1026 is specified by web height in mm (UNP 80 to UNP 300) and in the market is usually known by its centimetre number (Channel 8 to 30). It is used for bracing, frames, stairs, sub-structures and chassis.
UNP 80: 8.64 kg per metre 12 sizes · view table ← DIN 2440Gas Pipe weight table
Gas Pipe (welded, medium weight to DIN 2440 / EN 10255) is used for gas, water and building service piping as well as scaffolding and railings, and lengths are 6 m.
1/2 inch Pipe: 1.22 kg per metre 9 sizes · view table ← ISIRI 3132Rebar weight table
Ribbed Rebar and plain bar are supplied in sizes 6 to 40 mm, usually as 12 m bar. Weight per metre depends only on diameter and is the same for ribbed and plain bars of all classes (A1 to A4).
Rebar 16: 1.58 kg per metre 14 sizes · view table ← EN 10219Box Section & Hollow Section Weight Table
Box Section (square section) and Hollow Section (rectangular) are specified by section dimensions and thickness, and lengths are usually 6 m. Sections 2.5 mm thick and above are known as industrial Hollow Section.
Box Section 40×40 thickness 2: 2.39 kg per metre 15 sizes · view table ← EN 10058Flat Bar weight table
Flat Bar (solid rectangular section) is specified by width × thickness and is used for brackets, connections, railings, structural reinforcement and industrial parts. Rolled Flat Bar is usually 6 m long, and cut Flat Bar is sliced from Steel Plate in any width.
Flat Bar 50×5: 1.96 kg per metre 10 sizes · view table ←How is steel weight calculated?
The weight of any steel part is its volume times its density. Ordinary steel density is 7.85 g/cm³ and austenitic Stainless steel about 7.93. For standard sections (I-Beam, Channel, rails) the weight per metre is given in the standard table, and for Rebar, Steel Plate, Pipe, Box Section, Angle and Flat Bar it is calculated from the dimensions with a simple formula.
Theoretical weight and weighbridge weight
The figures in these tables are theoretical weights. Production standards allow tolerances for dimensions and weight, so each mill's actual weight may differ from the table by a few percent; the final invoice is based on the net load weight on the weighbridge. For full I-Beam and Channel properties (moment of inertia, section modulus…) see the section property table.

Half a Century of Presence