EN 10056

Angle weight table

Equal-leg Angle is identified by flange width and thickness (for example, Angle 50×5) and in the Iranian market is usually a 6-metre bar. It is used in trusses, bracing, door and window frames and light structures.

Angle weight table for all sizes

Angle (leg × thickness)Weight per metre (kg)Weight of a 6 m bar (kg)Bar per tonne
Angle 20×30.875.2191.3
Angle 25×31.116.6150.6
Angle 30×31.348.1124.2
Angle 30×41.7610.694.8
Angle 35×42.0712.480.4
Angle 40×42.3914.369.8
Angle 40×52.9417.756.6
Angle 45×53.3420.050
Angle 50×53.7322.444.7
Angle 50×64.4326.637.6
Angle 60×65.3732.231
Angle 70×77.3143.922.8
Angle 80×89.5557.317.5
Angle 90×912.0872.513.8
Angle 100×1014.9289.511.2
Angle 120×1221.48128.97.8
Angle 150×1533.56201.45

Weights are theoretical, based on nominal dimensions; actual weight may differ by a few percent depending on rolling tolerance and the mill, and the invoice is based on the weighbridge weight.

Angle weight calculation formula

Weight per metre (kg) ≈ (2 × flange width − thickness) × thickness × 0.00785 (dimensions in mm) — for example, Angle 50×5: (100 − 5) × 5 × 0.00785 = 3.73 kg per metre.

To buy, see the today's Angle price list; prices are per kilogram and the final load weight is set by the weighbridge.

Angle weight table FAQ

What is the weight of Angle 50×5?
Each metre of Angle 50×5 weighs about 3.73 kg; that is, each 6-metre bar is about 22.4 kg.
How is Angle weight calculated?
Weight per metre (kg) ≈ (2 × flange width − thickness) × thickness × 0.00785 (dimensions in mm) — for example, Angle 50×5: (100 − 5) × 5 × 0.00785 = 3.73 kg per metre.
Why does the actual Angle weight differ from the table?
The table gives the theoretical weight from nominal dimensions. The production standard allows tolerances (tolerance) for dimensions and weight, so each mill's actual weight may be a few percent lower or higher. The final invoice is based on the weighbridge weight.
How long is each Angle bar?
The common Angle bar length in the market is 6 m; you can ask for other lengths or cut-to-size in your request.