DIN 1025-5

Specifications IPE 600 (Standard I-Beam 60)

Weight per metre 122.4 kg · a 12 m bar about 1,469 kg · cross-section area 156.0 cm²

Section dimensions

Height (h)600 mm
Flange width (b)220 mm
Web thickness (tw)12 mm
Flange thickness (tf)19 mm
Root radius (r)24 mm

Geometric properties and weight

Cross-sectional area156.0 cm²
Weight per metre122.4 kg/m
Second moment of area, strong axis (Iy)92,082 cm⁴
Elastic section modulus (Wy)3,069 cm³
Plastic section modulus (Wpl,y)3,512 cm³
Radius of gyration (iy)24.30 cm
Second moment of area, weak axis (Iz)3,386 cm⁴
Elastic section modulus (Wz)308 cm³
Radius of gyration (iz)4.66 cm
Painting surface per metre2.06 m²/m
Weight of a 6 m bar734.7 kg
Weight of a 6 m bar1,469 kg
Number of 12 m bar per tonne0.7

Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.

IPE 600 In design and purchasing

IPE 600 With a height of 600 mm and flange width of 220 mm, it weighs about 122.4 kg per metre. With a moment of inertia of 92,082 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.

To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 12,245 kg. You can also calculate the weight of each bar with the weight calculator.