DIN 1025-5

Specifications IPE 100 (Standard I-Beam 10)

Weight per metre 8.1 kg · a 12 m bar about 97 kg · cross-section area 10.3 cm²

Section dimensions

Height (h)100 mm
Flange width (b)55 mm
Web thickness (tw)4.1 mm
Flange thickness (tf)5.7 mm
Root radius (r)7 mm

Geometric properties and weight

Cross-sectional area10.3 cm²
Weight per metre8.1 kg/m
Second moment of area, strong axis (Iy)171 cm⁴
Elastic section modulus (Wy)34 cm³
Plastic section modulus (Wpl,y)39 cm³
Radius of gyration (iy)4.07 cm
Second moment of area, weak axis (Iz)16 cm⁴
Elastic section modulus (Wz)6 cm³
Radius of gyration (iz)1.24 cm
Painting surface per metre0.41 m²/m
Weight of a 6 m bar48.6 kg
Weight of a 6 m bar97.2 kg
Number of 12 m bar per tonne10.3

Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.

Today's price IPE 100

ProductMillPrice (IRR)Updated
I-Beam 10 Esfahan SteelEsfahan Steel365,0001 Azar 1405
I-Beam 10 Nab TabrizNab Tabriz366,5001 Azar 1405
I-Beam 10 Kowsar AhvazKowsar Ahvaz368,0001 Azar 1405
I-Beam 10 ImportedImportedRequest a quote—

IPE 100 In design and purchasing

IPE 100 With a height of 100 mm and flange width of 55 mm, it weighs about 8.1 kg per metre. With a moment of inertia of 171 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.

To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 810 kg. You can also calculate the weight of each bar with the weight calculator.