DIN 1025-5
Specifications IPE 500 (Standard I-Beam 50)
Weight per metre 90.7 kg · a 12 m bar about 1,088 kg · cross-section area 115.5 cm²
Section dimensions
| Height (h) | 500 mm |
|---|---|
| Flange width (b) | 200 mm |
| Web thickness (tw) | 10.2 mm |
| Flange thickness (tf) | 16 mm |
| Root radius (r) | 21 mm |
Geometric properties and weight
| Cross-sectional area | 115.5 cm² |
|---|---|
| Weight per metre | 90.7 kg/m |
| Second moment of area, strong axis (Iy) | 48,198 cm⁴ |
| Elastic section modulus (Wy) | 1,928 cm³ |
| Plastic section modulus (Wpl,y) | 2,194 cm³ |
| Radius of gyration (iy) | 20.43 cm |
| Second moment of area, weak axis (Iz) | 2,141 cm⁴ |
| Elastic section modulus (Wz) | 214 cm³ |
| Radius of gyration (iz) | 4.31 cm |
| Painting surface per metre | 1.78 m²/m |
| Weight of a 6 m bar | 544.1 kg |
| Weight of a 6 m bar | 1,088 kg |
| Number of 12 m bar per tonne | 0.9 |
Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.
IPE 500 In design and purchasing
IPE 500 With a height of 500 mm and flange width of 200 mm, it weighs about 90.7 kg per metre. With a moment of inertia of 48,198 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.
To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 9,068 kg. You can also calculate the weight of each bar with the weight calculator.

Half a Century of Presence