DIN 1025-5

Specifications IPE 240 (Standard I-Beam 24)

Weight per metre 30.7 kg · a 12 m bar about 368 kg · cross-section area 39.1 cm²

Section dimensions

Height (h)240 mm
Flange width (b)120 mm
Web thickness (tw)6.2 mm
Flange thickness (tf)9.8 mm
Root radius (r)15 mm

Geometric properties and weight

Cross-sectional area39.1 cm²
Weight per metre30.7 kg/m
Second moment of area, strong axis (Iy)3,891 cm⁴
Elastic section modulus (Wy)324 cm³
Plastic section modulus (Wpl,y)367 cm³
Radius of gyration (iy)9.97 cm
Second moment of area, weak axis (Iz)283 cm⁴
Elastic section modulus (Wz)47 cm³
Radius of gyration (iz)2.69 cm
Painting surface per metre0.95 m²/m
Weight of a 6 m bar184.2 kg
Weight of a 6 m bar368.5 kg
Number of 12 m bar per tonne2.7

Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.

Today's price IPE 240

ProductMillPrice (IRR)Updated
I-Beam 24 Esfahan SteelEsfahan SteelRequest a quote—
I-Beam 24 Nab TabrizNab TabrizRequest a quote—
I-Beam 24 ImportedImportedRequest a quote—
I-Beam 24 Kowsar AhvazKowsar AhvazRequest a quote—

IPE 240 In design and purchasing

IPE 240 With a height of 240 mm and flange width of 120 mm, it weighs about 30.7 kg per metre. With a moment of inertia of 3,891 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.

To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 3,071 kg. You can also calculate the weight of each bar with the weight calculator.