DIN 1025-5

Specifications IPE 220 (Standard I-Beam 22)

Weight per metre 26.2 kg · a 12 m bar about 314 kg · cross-section area 33.4 cm²

Section dimensions

Height (h)220 mm
Flange width (b)110 mm
Web thickness (tw)5.9 mm
Flange thickness (tf)9.2 mm
Root radius (r)12 mm

Geometric properties and weight

Cross-sectional area33.4 cm²
Weight per metre26.2 kg/m
Second moment of area, strong axis (Iy)2,772 cm⁴
Elastic section modulus (Wy)252 cm³
Plastic section modulus (Wpl,y)285 cm³
Radius of gyration (iy)9.11 cm
Second moment of area, weak axis (Iz)205 cm⁴
Elastic section modulus (Wz)37 cm³
Radius of gyration (iz)2.48 cm
Painting surface per metre0.87 m²/m
Weight of a 6 m bar157.2 kg
Weight of a 6 m bar314.4 kg
Number of 12 m bar per tonne3.2

Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.

Today's price IPE 220

ProductMillPrice (IRR)Updated
I-Beam 22 Esfahan SteelEsfahan SteelRequest a quote—
I-Beam 22 Nab TabrizNab TabrizRequest a quote—
I-Beam 22 ImportedImportedRequest a quote—
I-Beam 22 Kowsar AhvazKowsar AhvazRequest a quote—

IPE 220 In design and purchasing

IPE 220 With a height of 220 mm and flange width of 110 mm, it weighs about 26.2 kg per metre. With a moment of inertia of 2,772 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.

To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 2,620 kg. You can also calculate the weight of each bar with the weight calculator.