DIN 1025-5
Specifications IPE 450 (Standard I-Beam 45)
Weight per metre 77.6 kg · a 12 m bar about 931 kg · cross-section area 98.8 cm²
Section dimensions
| Height (h) | 450 mm |
|---|---|
| Flange width (b) | 190 mm |
| Web thickness (tw) | 9.4 mm |
| Flange thickness (tf) | 14.6 mm |
| Root radius (r) | 21 mm |
Geometric properties and weight
| Cross-sectional area | 98.8 cm² |
|---|---|
| Weight per metre | 77.6 kg/m |
| Second moment of area, strong axis (Iy) | 33,742 cm⁴ |
| Elastic section modulus (Wy) | 1,500 cm³ |
| Plastic section modulus (Wpl,y) | 1,702 cm³ |
| Radius of gyration (iy) | 18.48 cm |
| Second moment of area, weak axis (Iz) | 1,675 cm⁴ |
| Elastic section modulus (Wz) | 176 cm³ |
| Radius of gyration (iz) | 4.12 cm |
| Painting surface per metre | 1.64 m²/m |
| Weight of a 6 m bar | 465.4 kg |
| Weight of a 6 m bar | 930.9 kg |
| Number of 12 m bar per tonne | 1.1 |
Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.
IPE 450 In design and purchasing
IPE 450 With a height of 450 mm and flange width of 190 mm, it weighs about 77.6 kg per metre. With a moment of inertia of 33,742 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.
To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 7,757 kg. You can also calculate the weight of each bar with the weight calculator.

Half a Century of Presence