DIN 1025-5

Specifications IPE 300 (Standard I-Beam 30)

Weight per metre 42.2 kg · a 12 m bar about 507 kg · cross-section area 53.8 cm²

Section dimensions

Height (h)300 mm
Flange width (b)150 mm
Web thickness (tw)7.1 mm
Flange thickness (tf)10.7 mm
Root radius (r)15 mm

Geometric properties and weight

Cross-sectional area53.8 cm²
Weight per metre42.2 kg/m
Second moment of area, strong axis (Iy)8,356 cm⁴
Elastic section modulus (Wy)557 cm³
Plastic section modulus (Wpl,y)628 cm³
Radius of gyration (iy)12.46 cm
Second moment of area, weak axis (Iz)604 cm⁴
Elastic section modulus (Wz)80 cm³
Radius of gyration (iz)3.35 cm
Painting surface per metre1.19 m²/m
Weight of a 6 m bar253.5 kg
Weight of a 6 m bar506.9 kg
Number of 12 m bar per tonne2

Calculated from the nominal dimensions of DIN 1025-5. The actual weight of each bar depends on rolling tolerance and the mill.

Today's price IPE 300

ProductMillPrice (IRR)Updated
I-Beam 30 Esfahan SteelEsfahan SteelRequest a quote—
I-Beam 30 Nab TabrizNab TabrizRequest a quote—
I-Beam 30 ImportedImportedRequest a quote—
I-Beam 30 Kowsar AhvazKowsar AhvazRequest a quote—

IPE 300 In design and purchasing

IPE 300 With a height of 300 mm and flange width of 150 mm, it weighs about 42.2 kg per metre. With a moment of inertia of 8,356 cm^4 about the strong axis, this I-Beam is mostly used in floor beams and building frames.

To estimate load weight, multiply the total length by the weight per metre; for example, 100 m of this section is about 4,224 kg. You can also calculate the weight of each bar with the weight calculator.